Cyclo Drive Reducer

Cycloidal pinwheel reducer can be a up-dated of new type transmissing machine made with K-H-V less tooth engagement and the cycloidal pin steering wheel clenching system, which are widely used in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical conveyors, job machinery etc, Market and cranes. various fields.

1. Equipment is made of high durability low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is followed for all good contact effectiveness, gears and with substantial precision
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service lifestyle and high bearing ability;
5. easy to check, disassemble and assemble.

Operation specifications and precautions
1.High modularization design: many equip with various engine or other power insight conveniently.Same machine type may equip with numerous power motor. It is easy to know the combination and
junction between every machine type.
2.Transmission ratio: good division, wide scope. The combined equipment type may form very large transmission ratio, i.e. result suprisingly low rotary speed.
3.Form of set up: the positioning to be installed isn’t limited.
4.High strength, small: the box body is made of great strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and good grinding process, which means bearing potential of unitvolume is excessive.
5.Long life: Beneath the condition of right type chosen (including choosing appropriate operation parameters)normal procedure and maintenance, the life span of main parts of speed reducer (except dressed in parts) should not be significantly less than 20000 hours. The wearing parts include lubricating essential oil, bearing and oil seal.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is usually low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High acceleration ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-down ratio and the efficiency is usually a lot more than 90%. If make use of multi-speed get the speed-down ratio is usually bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and result shaft are at same axis center, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is simple, but it can recognize high reduction ratio device.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved concurrently, and there are several gears engaged with 180 degree symmetry. So, the influence of tooth pitch mistake and cumulative tooth pitch error on the rotation accuracy is relatively average, making the positioning precision and rotation precision reach an extremely high level.
4. Less parts, convenient installation
The three basic pieces achieve a high deceleration ratio, plus they are all on a single axis, therefore the kit is easy to install and easy to shape.
5. Small in size and light in weight
Compared with the prior gear device, the quantity is 1/3, the pounds is 1/2, but can buy the same torque capability and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel material USES specialized steel with great fatigue strength.Not the same as ordinary transmission device, the quantity of teeth meshing accounts for in regard to 30% of the total quantity of teeth. Furthermore, it is in get in touch with with the surface, to ensure that the pressure borne by each equipment is reduced and large torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss due to friction. Therefore, high reduction ratio can be achieved while maintaining high proficiency, and miniaturization of driving motor could be realized.
8. Low noise
The gear meshing cycle velocity is low, the transmission activity force balance, therefore the operation is quiet, and the vibration is very small.
◆High speed ratio and huge efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission can be used, the deceleration ratio will get larger.
◆Because planetary transmission basic principle is adopted, the input shaft and output shaft are on a single axis line, to ensure that the machine style can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts produces the vibration and voice limited by a minimum.
◆Reliable use and lengthy service life for the reason that main parts are made from substantial carbon chromium steel, huge strength is obtained by quenching (HRC58-62), and rolling friction is employed in a few transmission contacts, so the service life is extended.
Cycloid reducer is certainly a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has various advantages, versatile, and can be both negative and positive operation.

•Big ratio, and huge efficiency Smooth operation,

• low noise The utilization of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically zero wear, durable.

• Compact structure,

• small size Because the application of a planetary transmission, the type shaft and the end result shaft on the same axis, making the model to get the smallest possible size.

• Reasonable design, easy maintenance, and breakdown easily install,

• the least number of parts in addition to simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion precision, enhance the output strength and carrier.

(2).Hoop clamp coupling have five connection methods ideal for different application environments.

(3).Size over PL/PF120(including)precision and high durability integral inner gear housing, processed in one station,which eradicate the cumulative error and assembling mistake of split type.Get rid of casting process;adopt sizzling of forging process, that may reduce the blank material defects.

(4).The meshing equipment adopt shaving process after carburizing and quenching,which better to make gear surface area smooth and high precision,reduce the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was engineered after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its performance and mounting dime nsions conform the same types of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, low noise, radiate heat efficiently, beautiful shape and compact structure.
Good sealing and adaptability.Its combo with T gear reducer and MB/MBN variator may meet all types of speed requirement.